Five of the Most Common Problems that Lead to Air Conditioner Service

As summer draws near, air conditioner service ought to be something that crosses your mind more frequently as you ponder your complete home comfort. Of course there are various things to search for when thinking through air conditioner service, but a few problems are more routine than others as you prep to ramp up your air conditioner use for the season.

No matter when you last had your air conditioner service completed, make sure to keep these five potential concerns in mind when your air conditioner is on the fritz.

1.     Leaking refrigerant

There are a couple things that can cause low refrigerant levels. It could be due to an undercharge during installation or the system could have developed a leak over time. Adding refrigerant to an already leaky air conditioner is akin to using a band aid on the Hoover Dam. It’s not going to cut it. Leaks should only be handled by trained technicians like the ones at Precision Mechanical in Rapid City so that you can make certain your system is operating at its best. Having that simple air conditioner service completed means that you’ll fix the leak and have the refrigerant charge match the precise specifications of the manufacturer, which provides you with peak performance and efficiency.

2.     Lack of maintenance

Allowing filters and coils to build up with dirt and grime will not only lessen your system’s efficiency, but it could cause a host of other problems if unaddressed. Setting up routine maintenance on your air conditioner with Precision Mechanical means that you’ll have a system providing you comfort when you need it most.

3.     Cycling too frequently

The air conditioner fan controls and compressor are most liable to wear, and if you have an air conditioner that cycles on and off routinely, you’ll likely have this issue. You’ll also want your service provider to look at the wiring to make certain there isn’t any corrosion and that the wiring job itself is done correctly. Cycling on and off during cooling season might also be a sign that your system is not sized correctly, and if that is the case you will also notice your home could have high humidity issues.  Because there are several problems to look at, you want to be sure you’re dealing with someone as reliable and experienced like the experts at Precision Mechanical.

4.     Sensor malfunctions

Air conditioners and their thermostat sensors are another common problem that can lead to air conditioner service or AC repair. Thermostat sensors, normally located behind the control panel, measure the temperature of air coming into the coil. This helps your air conditioner know whether it needs to turn on or stay off. So if the sensor is disturbed you could be left with a system that cycles nonstop.

5.     A clog in the drain lines

Condensation is created by your air conditioner during the cooling process, and your system is created to take care of its own drainage. If the drain becomes clogged you could be subjected to mold or mildew concerns, which can lead to an entirely different set of issues.

No matter the age of your air conditioner, there will always be problems that can rear their heads when it is used frequently. Summer is when your system should be running at its best, so give the pros at Precision Mechanical in Rapid City a call at 605-206-3766.